When water freezes, it expands and puts a strain on pipes. Regardless of size, shape or material, pipes will crack (or in worse cases, burst) once it can no longer withstand the pressure.
Allhoursplumbingslc.com stresses the importance of keeping plumbing systems warm during winter to homeowners. So, their experts recommend taking the following measures before the cold weather rolls in:
Open the Cabinet Doors
Pipes installed against enclosed walls spaces are vulnerable to freezing as oftentimes, these walls are not properly insulated. To address this issue, open the cabinet doors completely to allow warm air inside the enclosure.
Another way to keep the pipes warm would be to place an electric heater in front of the cabinet. Since the cabinet doors remain open during this time, parents must move any household chemicals out of children’s reach.
Turn Up the Thermostat
Thermostats increase the air temperature and keep your pipes warm. This is why thermostat temperatures should be constant 24/7. Although it could be quite an expense to keep the thermostat on for longer periods, it can save you from costly repairs due to a cracked or burst pipe in the long run.
Install a Heating Cable
A heating cable is an easily accessible alternative to the thermostat. Homeowners may purchase a heating cable at an electrical supply house or at their local home center.
As an electric wire needs to be wrapped around the pipes, it is important to read the manufacturer’s instructions before making the necessary attachments. Failure to follow these instructions may damage the pipes and overheat your plumbing system.
Frozen pipes are difficult to thaw and may require the services of a licensed plumber to restore them. Taking steps to prevent this situation from arising is a smart and low-cost way to make sure your plumbing stays intact during the cold months. Homeowners stand to gain much by keeping these suggestions in mind.